Corsair Force SSD (SATA II Only) Firmware Update Tool
version 2.4 |
windows
windows
Name: Corsair Force SSD (SATA II Only) Firmware Update Tool
Version: 2.4
Size: 51.85 MB
Category: Miscellaneous
License: Free
Released: 2013-12-11
Developer:
Downloads: 1197
Version: 2.4
Size: 51.85 MB
Category: Miscellaneous
License: Free
Released: 2013-12-11
Developer:
Downloads: 1197
| Rate this software: |
Description
IMPORTANT NOTES BEFORE BEGINNING YOUR UPDATEThis update is intended to not be destructive. However, we strongly urge that you back up any important data before beginning this procedure.
This update has been validated for use with Windows 7 and Windows Vista. It has not been validated with Windows XP. Users are encouraged to update the drives with either Windows 7 or Windows Vista when possible.
This update tool is intended to be run with the drive controller in AHCI mode. If your drive controller is not AHCI enabled and your update fails, you will need to change it to AHCI mode and also enable AHCI in your OS registry. Here is a guide for ENABLING AHCI.
For Intel based users, the update may not work with the Intel 10 series storage drivers. If you have issues with this update and you are using the 10 series Intel storage drivers, revert to the 9 series or use the Microsoft AHCI driver.
The update tool automatically reboots the system after the update is complete. However, some platforms have shown anomalies. If you suffer a blue screen, simply power off and reboot. If your drive is not seen by the drive controller after the update, remove power from the drive for 30 seconds, reapply power, and reboot the system.
DO NOT at any time power off your system during this procedure. This may “brick†your drive.
Some systems are not capable of this update. Users that have this issue are encouraged to find an alternative system for updating the drive. Users that cannot manually update are encouraged to file an RMA. Note that an RMA for update to firmware 2.4 will result in complete erasure of the drive.
UPDATE YOUR BIOS. As always for users with issues, we recommend that you update your motherboard/notebook to the most recent BIOS before attempting to flash your firmware. This may or may not resolve your issue but it is an excellent first step. Quite a few boards/notebooks have been given SSD specific updates over the past few months.
Please note that there is only 1 .PKG file referenced in step 2 in the current 2.4 firmware update .zip file. Ignore the references to 1. and 2.0 firmwares and the download link in the .PDF file. Also, ingore step 5 in the .PDF. Be sure to run the updater as ADMINISTRATOR.
Please do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.
Note: Try to set a system restore point before installing a device driver. It will help you restore system if installed driver not complete.
Screenshots
Similar Software
HP Mini 210-1020EK Notebook Intel Matrix Storage Manager Driver 8.9.4.1004Asus Eee PC 1001PQ Netbook CapsHook Utility Toshiba Satellite Pro P300 Bluetooth Monitor for Vista 4.02Asus ET2700INKS ASMedia USB 3.0 Driver Asus Eee PC 1005PE Netbook AHCI Driver 8.9.0.1023ECS H67H2-A3 (V1.0) Bios Asus X54L Notebook Intel Turbo Boost Monitor Application HP Mini 210-1000EI Notebook Intel Matrix Storage Manager Driver 8.9.4.1004iMac Late 2009 Windows 7 DriversAsus G73JH Notebook Intel Management Engine Interface 6.0.0.1179HP G62-355CA Notebook Realtek Card Reader Driver 6.1.7600.30120 A for Windows 7 Asus N43SN Notebook Bios 210 Gigabyte GA-X48T-DQ6 (rev. 1.1) Intel SATA RAID Preinstall Driver 8.9.0.1023 Asus A42JY Notebook Intel Turbo Boost Monitor Application Asus NX90JQ Notebook NEC USB3.0 Driver 2.0.4.0




