Ricoh Digital Camera TWAIN Driver for Windows Manual (Ver. 1.0.4.0)

This TWAIN driver allows applications that support Window 95, Windows 98,
or Windows NT 4.0 to acquire images directly from a Ricoh digital 
camera.

* This TWAIN driver can be used with the following Ricoh digital cameras:
  RDC-5000.

* System requirements:
  Windows 95, Windows 98, Windows NT 4.0 (or later).

* Software supported
  Paint Shop Pro 4.14
  (Supported software is not a guarantee of operability.)

<Installation>
Run the Setup.exe file.

<Selecting the TWAIN source from your application>
Select RICOH DIGITAL CAMERA RDC-5000 and click the Select button.

<Start TWAIN from your application>
The RICOH Digital Camera TWAIN panel appears.

<Importing images directly from your camera>
Set each of the following items in the OPTIONS panel.
Select your camera in the CAMERA panel. (RDC-5000)
Select the port to which your camera is connected in the PORT
dialog box. (COM1, COM2 etc.)
Set the connection speed in the SPEED dialog box. (115200 bps etc.)

<Importing selected images>
Next, open the CAMERA panel.
Set the CAMERA button to ON to open the connection to your camera.
Use the <- and -> buttons to make your selection, 
then press the SELECT button and the OK button to begin importing the image.

<Importing images from a hard disk, floppy disk, or PC card>
Press the FILE button to display the thumbnails window. Select the 
drive and directory, then select J6I or JPG for the filename to view 
the thumbnail images.
To import an image, select its thumbnail image then click OK. The image
is imported into, and displayed in, your application.

note:If several images are selected, some applications will not transfer
     image data after the first image has been imported.


<< TWAIN INSTALLED DLLS LIST >>

	\Windows \dc3twain.ini			->  If RICOH TWAIN doesn't exist, you can delete.
	          twain.dll			->  *You cannot delete!*
	          twain_32.dll			->	"
	          twunk_16.exe			->	"
	          twunk_32.exe			->	"
	
	\Windows \system \RDXCM32.DLL		->  If application which can communicate with
						    RICOH digital camera doesn't exist, you can delete. 
	                  RD3CM32.DLL		->	"
	                  RDCCM32.DLL		->	"
	                  RDXIF32.DLL		->	"
	                  RDJ6X32.DLL		->	"
	                  RDAVI32.DLL		->	"
	                  RDADP32.DLL		->	"
	                  RIDIB32E.DLL		->	"
	                  RIFLT32E.DLL		->	"
	                  RIRED32E.DLL		->	"
	                  JPCW32.DLL		->	"
	                  JPDW32.DLL		->	"
	                  JLFW32.DLL		->	"
	
	\Windows \TWAIN_32 \RICOH \DC5X32.DS	->  If You Should like to delete RICOH DIGITAL CAMERA RDC-5000,
						    You can delete.
	                    Readme.txt		->  You can delete.
	
End User License Agreement
 =========================
 The following is a legal software license agreement between you, 
 the software end user, and Ricoh Company Ltd. Carefully read this 
 license agreement before using the product. Using the product 
 indicates that you have read this license agreement and agree to 
 its terms.

 Grant of License. 
 This license permits you to use one copy of the software included in
 this package on any single computer. For each software licensee, 
 the program can be "in use" on only one computer at any given time. 
 The software is "in use" when it is either loaded into RAM or installed
 into the hard disk or other permanent memory. A special license permit 
 from Ricoh is required if the program is going to be installed on a 
 network server for the sole purpose of distribution to other computers.

 Copyright. 
 The software contained in this package is owned and published by Ricoh, 
 and is protected by United States copyright laws, international treaty 
 provisions, and all other applicable national laws. The software must be 
 treated like all other copyrighted materials (e.g. books and musical 
 recordings).
 This license does not allow the software to be rented or leased, 
 and the written materials accompanying the software (if any) may not 
 be copied.

 Limited Warranty. 
 Ricoh, warrant that the software contained herein will perform substantially
 in accordance with the accompanying documentation.

 No Other Warranties.  
 Ricoh disclaim all other warranties, either express or implied, including 
 but not limited to implied warranties of merchantability and fitness for a 
 particular purpose, with respect to the Software, the accompanying written 
 materials, and any accompanying hardware (if any).

 No Liability for Consequential Damages.  
 In no event shall Ricoh or the suppliers be liable for any damages whatsoever 
 (including but not limited to damages for loss of business profits, business 
 interruption, loss of business information, or any other pecuniary loss) 
 which results from an inability to use this software, even if Ricoh have been 
 advised of the possibility of such damages.  Because some states/jurisdictions 
 do not allow the exclusion or limitation of consequential or incidental 
 damages, the above limitations may not apply to you.


 U.S. Government Restricted Rights. 
 The Software and documentation are provided with Restricted Rights. 
 Use, duplication, or disclosure by the U.S. Government is subject to 
 restrictions as set forth in subparagraph c (1) (ii) of the Rights in Technical
 Data and Computer Software clause at DFARS 252.227-7013, or subparagraphs 
 c (1), (2), and (3) of the Commercial Computer Software - Restricted Rights 
 at 48 CFR 52.227-19, as applicable, and any amendments thereto.
 The manufacturer is Ricoh Company Ltd., 2-1-1, Ohmori-Kita, 2-Chome, 
 Ohta-ku, Tokyo, 143-0016 Japan.

 If this product was purchased in the United States, this Agreement is governed 
 by the laws of the state of California; otherwise, local laws may apply. 

 Copyright (c) 1999, Ricoh Co., Ltd.

