Basics of how to use Radio_Pro2052

1. Connect straight serial cable(not null modem), cut on scanner, and put scanner in remote mode by holding down remote key until you see SFT flashing on the right of the display.

2. Start the software, and select what port your cable is on, and select what baud rate to use, then press the connect button. The scanner should now start scanning, if you see crazy looking characters, then the baud rate is wrong. You can change the baud rate on the fly, while your still connected to fix this.

3. To upload your scanners frequencies from the SCANNER to the PC select a Start, End channel in the text boxes provided, then press the Upload Button. Once all channels are uploaded, save your file in a safe place. I always use two copys, one to play with, and one for backup.

4. To download your scanner frequencies to the SCANNER from the PC open a previously saved file that you uploaded earlier, or manually edit the large text box just below the Download button. Keep in mined that manually edited text MUST be in the same format as what you have seen in uploads, and in the Radio Shack PRO-2052 users manual. Also channels don't have to be in order to download.

5. To Send Commands Manually see users manual.

6. To Program one channel at a time press PROGRAM Button. Remember the format MUST be just as the manual specifies. 

7. To goto channel, while hovering over the GO Button you will see where to enter the channel number.

8. The Fix/Format button is for removing channels from the file you uploaded earlier that has no frequencies programmed in. This will speed the download by not having to go through that channel.  Note: you can also do this before saving your file.

9. The DeadWood button is my personal favorite, use this after you have been logging for few hours. You will see what frequencies are having the most activity. Please use this button with log files only.

10. To Log channels, frequencies, and time, start scanning, then press the Log Enable button. When your done logging press the Log Disable button. It will also log your trunking IDs, and then you can use the DeadWood button to find the most active IDs.

11. Also at the last minute I decided to add a small app. called 2052helper. This is my little utility to copy and past freqs. that I want to format before downloading to my scanner. It will start at whatever channel you want, and add them in format that your scanner will take. Two things you MUST do to make it work correctly are, the freqs Must be in a colum, and a dot for freqs with numbers less than eight. -->example #1 (123.456)->(C001 F01234560) example #2 (01234560)->(C001 F01234560) example #3 (0.456)->(C001 F00004560) example #4 (.456)->(C001 F456)<-----this will not work, you must have a number on each side of dot.

Problems with the software: 
1. The trunking part of the programing is not finished, but what I have finished is looking farely good. I have only programmed, and tested Motorola Type II trunking.

2. Bank numbers, I want to put them somewhere.

3. Sometimes, maybe weeks later while trying to close the program it will not respond, and freezes.  I've made some changes to the logic I think may solve this problem.  Note: it has never crashed my computer, If you have the same problem, will you please email me at jlebr549@comcast.net and let me know.

4. In general, the software is not finished, and probably never will be. Every day I find something I want to add, so the version your using now is most likely not what I'm using. So If  you want to keep the latest version on your laptop, or desktop check my web site @ http://home.comcast.net/~jlebr549/marko.htm, or for direct download replace marko.htm with Radio_PRO2052.zip and the download will start automatically.