This XP driver package consists of the following components:

Display Driver (version: 197.31) WHQL
Audio Driver (version: 1.0.9.1) WHQL


Unattended Video/audio Driver Installation
----------------------------------------

  If you prefer to configure your system by command line editing you may
  install the video/audio drivers and set the monitor configuration of your
  primary display as follows:


  1. Open a command prompt window by clicking on 'Start', 'Programs',
     'Accessories', 'Command Prompt'.

  2. Go to the directory which contains the NVIDIA device driver
     (e.g. C:\NVIDIA_DRVS)

  3. Enter the following command:

     SETUP -h"x" -v"y" -b"c" -j"f" -k -s

     These are the command line options.  Please see section 2.3 for valid
     options:

     -h"x" Resolution (horizontal)

     -v"y" Resolution (vertical)

     -b"c" Color Depth (in bits per pixel)

     -j"f" Refresh rate (in Hz)

     -k    Does not reboot the system when finished.

     -forcereboot    Reboot the system when finished.

     -s    Silent Installation - no installation messages displayed during
           installation.

     Example: For a silent installation of the NVIDIA video/audio drivers without reboot,
     configuring your monitor for 800x600 at 75 Hz, 16 bits per pixel,
     the command looks like this:

       setup -h"800" -v"600" -b"16" -j"75" -k -s

     Warning!
     Selecting a resolution or refresh rate that your monitor does not
     support can permanently damage the monitor.  Check the documentation
     of your monitor and make sure that the monitor supports the selected
     resolution and refresh rate.


