
--CONTENTS--
 1 - Installation Instructions
 2 - Flash under Operating System
 3 - Flash Program Options
 4 - Flashing Back to an Older Level of BIOS


*****************************************************************************
*                       1. Installation Instructions                        *
*                                                                           *
*     Please print out these instructions or write them down before         *
*     starting this flash update utility.                                   *
*                                                                           *
*     This flash under operating system (32-bit/64-bit) utility provides    *
*     the ability to update the system flash from a windows application.    *
*                                                                           *
*     The utility may be downloaded from the internet and unpacked into     *
*     the default path: "C:\SWTOOLS\FLASH\5OJYxxUSA", where "xx"            *
*     represents the two digit flash level. After unpacking the utility,    *
*     run "afuwin.exe" from the default path to launch the windows       *
*     based flash application to update your system.                        *
*                                                                           *
*****************************************************************************


*****************************************************************************
*                     2. Flash Under Operating System                       *
*                                                                           *
*     1.  Please make note of any settings you have changed in the BIOS     *
*         Setup utility. They may have to be re-entered after updating      *
*         the BIOS.                                                         *
*                                                                           *
*     2.  In the application graphical user interface, press button "Open"  *
*         and select the BIOS ROM image "imagexx.rom", where "xx"           *
*         represents the two digit flash level. Then press button "Flash" to   *
*         start the update process. When the update process is complete,    *
*         press button "Exit" to exit the application.                      *
*                                                                           *
*     3.  Update may take up to 2 minutes. Do not power off or restart      *
*         the system during this procedure! It is highly recommended to     *
*         reboot your system after the update.                              *
*                                                                           *
*****************************************************************************


*****************************************************************************
*                          3. Flash Program Options                         *
*                                                                           *
*     The default operation of the flash update program is to use the       *
*     graphical user interface provided by the AFUWINGUI program. You can   *
*     also run the program from a dos command box by running "flash.cmd".   *
*     Before running the "flash.cmd", please change the command line to     *
*     the options you need. The command format is include                   *
*     "afuwin.exe <BIOS ROM file name> [option1] [option2] ... [optionX]".  *
*                                                                           *
*     The following options are available when the program is invoked       *
*     from a dos box command line.                                          *
*                                                                           *
*     [OPTIONS]                                                             *
*     /p                Program main BIOS image.                            *
*     /b                program boot block.                                 *
*     /n                program NVRAM.                                      *
*     /q	        Quiet mode enable.                                  *
*     /reboot	        Reboot after update BIOS done.                      *
*     /shutdown         Shutdown after programming.                         *
*                                                                           *
*     The following example includes the standard options of the            *
"     file "flash.cmd":                                                     *
*       afuwin.exe image36.rom /p /b                                     *
*                                                                           *
*                                                                           *
*****************************************************************************


*****************************************************************************
*                 4. Flashing Back to an Older Level of BIOS                *
*                                                                           *
*     In order to flash back to an older level of BIOS, the following       *
*     steps should be used to insure the latest flash utility is used.      *
*                                                                           *
*     1.  Obtain the latest level of BIOS update program from the Lenovo    *
*         web site.                                                         *
*     2.  Copy afuwin.exe, Ucoredll.dll, Ucoresys.sys, Ucorevxd.vxd ,Ucorew64.sys   *
*         from the latest bios update program folder to the older level     *
*         bios update program folder. Replace the same files in the older   *
*         level bios update program folder.                                 *
*     3.  In the application graphical user interface, press button "Open"  *
*         and select the BIOS ROM image "imagexx.rom", where "xx"           *
*         represents the two digit flash level. Then in the page "Setup",   *
*         make sure the option "Main BIOS Image" *
*         and "Do Not Check ROM ID" are selected. At last, press button     *
*         "Flash" to start the update process. When the update process is   *
*         complete, press button "Exit" to exit the application.            *
*     4.  Update may take up to 2 minutes. Do not power off or restart      *
*         the system during this procedure! It is highly recommended to     *
*         reboot your system after the update.                              *
*                                                                           *
*****************************************************************************