========================================
========================================
Intel(R) Desktop Control Center 
Release v5.5.1 README
August 24, 2010
For:  Intel(R) Desktop Board DX58SO
      Intel(R) Desktop Board DP55KG
      Intel(R) Desktop Board DP55SB
========================================
========================================

Note:  Temperature measurements are approximate and should not be 
       used to validate thermal solutions.

Note:  You must have Microsoft* .NET Framework installed (version 3.5 or 
       higher) on your system before launching Intel(R) Desktop Control 
       Center.

Please send feedback and support requests to:
       idccfeedback@intel.com

For support information, go to:
       http://support.intel.com/support/9089.htm  


README Contents
===============
1. Introduction
2. System Requirements
3. Installation 
4. Known Issues and Solutions
5. System Configuration Notes
6. Legal Disclaimer
7. NLog BSD License


===============
1. INTRODUCTION
===============
The Intel(R) Desktop Control Center allows you to modify cooling 
parameters to ensure system stability, optimize performance, and control 
cooling/acoustic characteristics.  You may perform stress tests to verify 
system and setting stability and conduct testing to measure the impact 
of system configuration and setting modifications.  The system 
gauges provide real time feedback of relevant information so you can 
observe the effects of various changes.

This README file contains the latest information for the Intel Desktop 
Control Center v5.5.1 release software application. 

For more information, to see a list of supported motherboards, or to 
download a different or newer version of Intel(R) Desktop Control Center 
for your Intel(R) Desktop Board, go to:   http://www.intel.com/go/idcc


======================
2. SYSTEM REQUIREMENTS
======================

Hardware Requirements
---------------------
The Intel Desktop Control Center v5.5.1 supports only the Intel(R) 
Desktop Board DX58SO, the Intel(R) Desktop Board DP55KG, and 
the Intel(R) Desktop Board DP55SB.   

A video graphics card with hardware-based support for Microsoft* 
DirectX* 10 is highly recommended.  

CPU overclocking features are only available with Intel(R) Extreme 
Edition processors.  Intel Desktop Control Center v5.5.1 will run on 
non-Extreme Edition processors, but the CPU overclocking features 
will not be enabled.


Operating System 
----------------
Intel Desktop Control Center software should be installed on the 
Intel(R) Desktop Board DX58SO, the Intel(R) Desktop Board DP55KG, 
or the Intel(R) Desktop Board DP55SB with one of the following 
operating systems:

 - Microsoft Windows* 7 (32-bit and 64-bit) for Home Premium, 
   Professional, and Ultimate editions.

 - Microsoft Windows Vista* operating systems (32-bit and 64-bit) 
   for Home Basic, Home Premium, Business, Ultimate, and Enterprise.

Note: If your system has other applications running that could 
      prevent a system reboot, please close those applications 
      before starting an installation to protect you from loss 
      of any unsaved data.

Note: The Windows Vista Starter Edition and the Windows 7 Starter 
      Edition are not supported.  Earlier operating system versions 
      of Windows 95, 98, 98 SE, NT, 2000, ME, XP, and Server 2003 
      are not supported.

Note: Your system also requires installation of the Microsoft .NET 
      Framework Version 3.5 Redistribution Package software or higher.  
      If any parts are missing, SETUP.EXE will automatically download 
      and install them if the computer is connected to the Internet. 
      
Note: The Intel(R) Desktop Control Center v5.5.1 is not backwards 
      compatible with any previous versions of Intel Desktop Control 
      Center.  You cannot revert back to a previous version of IDCC 
      after you install this build.


BIOS Requirements
-----------------
Make sure you have the appropriate BIOS installed as follows:

 - If Intel(R) Desktop Board DX58SO, use the BIOS:
       SOX5810J.86A version 5417 or newer

 - If Intel(R) Desktop Boards DP55KG or DP55SB, use the BIOS:
       KGIBX10J.86A version 5531 or newer

If you're not sure what BIOS version is installed, restart the computer 
and press F2 to enter the BIOS setup.  The BIOS version will be 
displayed. 
       For example, BIOS SOX5810 is noted as follows:  
       SOX5810J.86A.5417.2010.xxxx.xxxx.

If you don't have the correct BIOS installed, you can download it 
from the site: 
       http://downloadcenter.intel.com/default.aspx  
          If needed, search on:
          "5417" or newer for Desktop Board DX58SO, or
          "5531" or newer for Desktop Boards DP55KG and DP55SB


CAUTION: Incrementing CPU Voltage Setting to Higher Values
----------------------------------------------------------
Due to the nature of over-clocking activities, a loss of processor 
execution could result in loss of control from the Intel(R) Desktop 
Control Center application.  This could occur during both 
manual-tuning and auto-tuning operation.  System recovery might 
require: 
   1. Powering-down the system
   2. Perform a BIOS recover (See BIOS Configuration Jumper settings in 
      this board's Technical Product Specification.  Search at the URL:
         http://support.intel.com )
   3. Then re-start the system and then use more conservative settings 
      with Intel(R) Desktop Control Center

This could happen when the CPU Voltage is incremented too high for the 
following:
   -  Existing settings (for example, Bus speed, Clock multiplier, 
      Memory timing) 
   -  Cooling capability of the processor's heat sink

The cooling solutions (fan/heat sink and chassis cooling design) need to 
adequately keep the processor within its operating temperature range.  
Otherwise, extreme settings of the CPU Voltage may result in:
   -  Loss of processor execution
   -  System lockup
   -  Processor damage
   -  Or combinations of the above possible results

If a higher CPU voltage is still desired after understanding the above risks, 
then a high performance cooling solution and improved chassis airflow is 
required.


Available Addressable System Memory
-----------------------------------
System resources and hardware (such as PCI and PCI Express*) require 
physical memory address locations that can reduce available addressable 
system memory. This could result in a reduction of as much as 1 GB or 
more of physical addressable memory being available to the operating 
system and applications, depending on the system configuration and 
operating system.


Display Configuration
---------------------
The minimum supported display configuration is 1024x768 pixels with 16-bit 
color or higher and Normal font size.


=============================
3.  INSTALLATION 
=============================
The Intel Desktop Control Center v5.5.1 supports only the Intel(R) 
Desktop Board DX58SO, the Intel(R) Desktop Board DP55KG, and the 
Intel(R) Desktop Board DP55SB.

You must be logged in as an administrator before you install/run/uninstall
Intel Desktop Control Center


To install Intel Desktop Control Center:

1. Make sure you have the latest BIOS installed as follows:

 - If your system has the Intel(R) Desktop Board DX58SO, use BIOS:
       SOX5810J.86A version 5417 or newer

 - If your system has the Intel(R) Desktop Boards DP55KG or DP55SB, use BIOS:
       KGIBX10J.86A version 5531 or newer

   If you're not sure what BIOS version is installed, restart the 
   computer and press F2 to enter the BIOS setup.  The BIOS version 
   will be displayed. 
       For example, BIOS SOX5810 is noted as follows:  
       SOX5810J.86A.5417.2010.xxxx.xxxx.

   If you don't have the correct BIOS installed, you can download it 
   from the site: 
       http://downloadcenter.intel.com/default.aspx  
          If needed, search on:
          "5417" or newer for Desktop Board DX58SO, or
          "5531" or newer for Desktop Boards DP55KG and DP55SB

2. Install the latest build of Intel Desktop Control Center (v5.5.1) 
   by double-clicking the IDCCSETUP.EXE file.

3. Once Intel Desktop Control Center is initiated, the embedded XTU service 
   will load and run in the background.  (if needed, see known issue on 
   previous installation of XTU 1.3 service)

4. Reboot the computer.

You are now ready to use the Intel Desktop Control Center. 


=============================
4. Known Issues and Solutions
=============================
After installing Intel Desktop Control Center 5.5.1, if you encounter 
issues that are not documented below, please send an email to 
idccfeedback@intel.com and attach the following file: 
  
  C:\PROGRAM FILES\INTEL\INTEL(R) DESKTOP CONTROL CENTER\LOGS\IDCC.LOG 
       (for 32-bit OS)

  C:\PROGRAM FILES(x86)\INTEL\INTEL(R) DESKTOP CONTROL CENTER\LOGS\IDCC.LOG 
       (for 64-bit OS)
	
Also try to include a screen shot of the error message.

Please also include your BIOS version, OS version (Windows 7 or 
Windows Vista; 32- or 64-bit), and OS language.


Issues For Intel(R) Desktop Boards DP55KG and DP55SB
----------------------------------------------------
----------------------------------------------------

- ISSUE-1: EIST must be Enabled in BIOS for Intel(R) Turbo Boost 
       Technology to work.  If EIST is disabled via BIOS or IDCC, 
       the turbo mode ratios will still be changeable in BIOS but 
       will not do anything.  Turbo mode ratios will be correctly 
       greyed out in IDCC and wont allow any adjustment.
  STATUS: Under investigation


- ISSUE-2: In Windows* 7, the IDCC icon for Program and Features (Add or 
       Remove Programs) and the UAC message prompt during uninstallation 
       is not showing up correctly.
  STATUS: This issue is under investigation.



Issues For Intel(R) Desktop Board DX58SO
----------------------------------------
----------------------------------------

- ISSUE-1: EIST must be Enabled in BIOS for Intel(R) Turbo Boost 
       Technology to work.  If EIST is disabled via BIOS or IDCC, 
       the turbo mode ratios will still be changeable in BIOS but 
       will not do anything.  Turbo mode ratios will be correctly 
       greyed out in IDCC and wont allow any adjustment.
  STATUS: Under investigation


- ISSUE-2: Intel(R) Desktop Control Center may fail to recover from an 
       auto-tuning run after the application is invoked. The following 
       error message displays: "Application error LoadPerf (Event 3002)"   
  STATUS: Under investigation
  WORKAROUND:  Use the following procedure:
       1) Un-install Intel Desktop Control Center.
       2) Then re-install Intel Desktop Control center.
       3) Set up membership in the local Administrators group.
       4) To rebuild the list of counters in the registry: 
           - Click Start, expand All Programs, and expand Accessories. 
           - Right-click Command Prompt, and then click Run as administrator.
           - At the command prompt, type lodctr /r, and then press ENTER. 
           - Start Intel Desktop Control Center.


- ISSUE-3: During auto tuning, the system reports errors or blue screens.
  STATUS: This is expected behavior between reboots in auto tuning.


- ISSUE-4: The system becomes inoperable (black screen) during a planned 
       auto tuning reboot.
  WORKAROUND: The system was pushed too far and is unable to recover. You 
       need to reset the system which may include using the jumper on the 
       desktop board. We recommend manually adjusting settings in smaller 
       increments.


- ISSUE-5: When you select and try to apply unreasonable values in palettes, 
       the system becomes unstable.
  WORKAROUND: Select reasonable values when adjusting system performance.


- ISSUE-6: Hardware changes, such as memory type and processor, may 
       invalidate presets, and certain service release updates may not be 
       compatible with presets generated from an older version.
  WORKAROUND: Only use presets that were created with the same 
       version of Intel Desktop Control Center and with the same hardware
       configuration.  If you wish to change hardware or upgrade to a
       newer version of the application, document the presets you wish to
       reuse.


- ISSUE-7: The main console does not fully display when the resolution is 
       reduced to 800x600.
  WORKAROUND: Use the recommended 1024x768 resolution with 16-bit color
       or higher and Normal font size.


- ISSUE-8: When large fonts are used, the display is distorted.
  WORKAROUND: Use the recommended 1024x768 resolution with 16-bit color
       or higher and Normal font size.


- ISSUE-9: When the system is connected to a router that is not on a
       network, installation is slow (about five minutes) and 
       operation response is slow.
  STATUS: No changes planned. The system can be removed from the router 
       or the router should be connected to a fully working network
       with Internet access.


- ISSUE-10: When configured with Microsoft Windows Vista 32-bit, 4 GB of
       memory usage shows incorrectly in the Task Manager.  
  STATUS: No changes planned. This is due to the addressable memory by 
       32 bit O/S.


- ISSUE-11: When configured with Microsoft Windows Vista, graphics anomalies 
       are seen on the Intel Desktop Control Center console.
  STATUS: No changes planned. These are typically background shading issues.


- ISSUE-12: When configured with some add-in graphics cards, anomalies 
       are seen on the Intel Desktop Control Center console.
  STATUS: No changes planned. These are typically shading issues.


- ISSUE-13: A non-informative message displays when Microsoft .NET 3.5 is   
       not installed and Intel Desktop Control Center is launched.
  WORKAROUND: You must have Microsoft .NET Framework 3.5 or higher installed 
       on the computer before installing Intel Desktop Control Center.


=============================
5. System Configuration Notes
=============================

Documentation   
-------------
Readme.txt -- Provides last minute errata for this Intel Desktop 
Control Center software.

Intel Desktop Control Center.chm -- Provides help information.



====================
6.  Legal Disclaimer 
====================
Please refer to your full Product License Agreement for the complete 
text of the software license.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL 
PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, 
TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.  
EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR 
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL 
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR 
USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING 
TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR 
INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY 
RIGHT.

UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS 
ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE 
OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY 
OR DEATH MAY OCCUR.

This Intel software is not intended for use in medical, life saving, 
life sustaining, critical control or safety systems, or in nuclear 
facility applications.

Intel may make changes to specifications and product descriptions 
at any time, without notice. Designers must not rely on the absence 
or characteristics of any features or instructions marked "reserved" 
or "undefined." Intel reserves these for future definition and shall 
have no responsibility whatsoever for conflicts or incompatibilities 
arising from future changes to them. The information here is subject 
to change without notice.  Do not finalize a design with this 
information.

The products described in this document may contain design defects or 
errors known as errata which may cause the product to deviate from 
published specifications. Current characterized errata are available on 
request. 

Intel is not responsible for any errors which may appear in the 
documentation or the Software. Intel reserves the right to make changes 
to this document or Software at any time, without notice. Intel may 
make changes to the Software, or to items referenced therein, at any 
time without notice, but is not obligated to support, update or provide 
training for the Software.

Intel, Pentium, Intel Core, and the Intel logo are trademarks or 
registered trademarks of Intel Corporation or its subsidiaries in the 
United States and other countries.

* Other names and brands may be claimed as the property of others.

Copyright  2010 Intel Corporation. All rights reserved.


====================
7.  NLog BSD License
====================
Copyright (c) 2004-2006 Jaroslaw Kowalski <jaak@jkowalski.net>
 
All rights reserved.
 
Redistribution and use in source and binary forms, with or without 
modification, are permitted provided that the following conditions 
are met:
 
* Redistributions of source code must retain the above copyright notice, 
  this list of conditions and the following disclaimer. 
 
* Redistributions in binary form must reproduce the above copyright notice,
  this list of conditions and the following disclaimer in the documentation
  and/or other materials provided with the distribution. 
 
* Neither the name of Jaroslaw Kowalski nor the names of its 
  contributors may be used to endorse or promote products derived from this
  software without specific prior written permission. 
 
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 
THE POSSIBILITY OF SUCH DAMAGE.

******************************************************************************

README.TXT File ID: v5.5.1 08242010at  (KG-SB-SO) ((w3a-83))

