System Requirements
Before installing the network adapter, check your system for the following minimum configuration
requirements for Intel® Gigabit Network Adapters.
Hardware Compatibility - Gigabit Adapters
- One of the following slot types, depending on your
adapter:
- A PCI bus master slot, 32-bit or 64-bit, operating at 33 or 66 MHz
- A PCI-X slot operating at 66, 100 or 133 MHz
(recommended)
- A PCI-Express slot (v1.0a or newer), 4x, 8x or
16x.
- The PRO/1000 MT Quad Port Server adapter requires a
3.3 volt only slot. It cannot be installed in a 5.0 volt or universal slot.
- 64 MB of system memory
- The latest BIOS for your computer
Supported 32-bit Operating Systems
Basic software and drivers are supported on the following operating systems:
- DOS
- SunSoft* Solaris* (drivers and support are provided by the
operating system vendor)
Advanced software and drivers are supported on the following operating
systems:
- Microsoft Windows XP, with latest service pack installed
- Microsoft Windows Vista*, with latest service pack installed
- Microsoft Windows 7, with latest service pack installed
- Microsoft Windows Server* 2003, with latest service pack
installed
- Microsoft Windows Server 2008, with latest service pack
installed
- Linux*, v2.4 kernel or higher
- Novell* NetWare* 5.1 SP7, 6.0 SP5, 6.5 SP2
- FreeBSD*, 6.0 kernel or higher
Platform Requirements for Intel® Extended Memory 64
Technology (Intel® EM64T)
Intel supplies 64-bit drivers for the following operating systems:
- Microsoft Windows Server 2008, with latest service pack installed
- Microsoft Windows Server 2008 R2, with latest service pack installed
- Microsoft Windows Server 2008 Hyper-V*, with latest service pack installed
- Microsoft Hyper-V Server 2008, with latest service pack installed
- Microsoft Windows Server 2003, with latest service pack installed
- Microsoft Windows XP, with latest service pack installed
- Microsoft Windows Vista, with latest service pack installed
- Microsoft Windows 7, with latest service pack installed
- Red Hat* Linux
- SUSE* Linux
- FreeBSD
A platform that supports Intel® EM64T will run in either 64-bit mode or
32-bit compatibility mode. In order for it to run in 64-bit mode,
the following requirements must be met:
- The Intel EM64T system must have a 64-bit BIOS that takes
advantage of Intel® Extended Memory 64 Technology
- One of the supported 64-bit operating systems must be
installed
The installer for the adapter drivers will only list the
drivers that are compatible with the currently running operating system.
- If the system is running in compatibility mode, only IA-32
drivers will be available.
- If the system is running in 64-bit mode, only Intel EM64T
drivers will be available.
Last modified on 11/01/10 3:28p Revision 20